Frag Out! Magazine
Issue link: https://fragout.uberflip.com/i/1407740
stand-alone and under-barrel configurations of the launcher as the pistol grip location slightly extends the distance between palm and safety switch lever which should be enlarged to solve the problem. The frame is 2.1 kilograms. With red dot and VFG attached we were able to place the gre- nade launcher in the Blue Force Gear M320 grenade launcher hol- ster which is quite a popular solution to carry this kind of small arms. It seems that the grenade launcher from Fabryka Broni is slightly slimmer than the M320. TECHNICAL DETAILS The 40x46SR Fabryka Broni grenade launcher is a single fire infantry close support weapon designated to fight and disable en- emy personnel, destroy technical equipment, buildings, weapon placements, light armored vehicles, setting smoke screens and area illumination. Launcher is mounted under barrel of the 5,56 mm MSBS assault rifle with four screws but it will come with lower part of handguard for faster attachment (user will have to remove the lower part of rifle's handguard and replace it with gre- nade launcher) Grenade launcher is designed for both right and left handed shooters by ambidextrous placement of the manipulators, safety lever, and breach locking button. Breach opens to the side thanks to the spring mechanism that closes the barrel, pressing the bar- rel opening button lowers the catch and its edge comes up from the bolt base cut of the barrel, and the barrel itself is opened by the force of the spring. To close the barrel, it has to be pushed to the buffer, than the latch will catch itself by the ledge. Barrel is opening only to the left side; there is no possibility to change that. In the entry side of the barrel there were placed two notches (in case of emergency) to extract an empty case when it does not come out by the force of gravity. Grenade launcher has the striking mechanism with the firing 44 www.fragoutmag.com