THE WML™ WHITE:
Ä
constant mode – you can select it by shifting the
lever to its forward position and pressing the switch.
The light is turned off after the subsequent pressing
of the activation switch or shifting the lever. In the for-
ward position of the lever, you can also use a momen-
tary mode – at turning the flashlight on you should
hold the activating switch by at least 0.5 second;
Ä momentary mode – the lever must be in its rear
position. You activate the flashlight by pressing the
button, and when take off your finger from it the flash-
light will turn off;
Ä strobe – the lever should be shifted to its forward
position, and then you should quickly press the but-
ton twice.
THE WML™ WHITE/IR:
Ä
constant mode (white light) – as in the WML™
White, but without a possibility to proceed into the
momentary mode;
Ä momentary mode (white light) – the lever must
be in forward position; an activation by holding the
button for 0.5 second;
Ä strobe (white light) – quick double tap of switch
button;
Ä constant mode (IR) – the lever in its rear position,
activation by pushing the button;
Ämomentary mode (IR) – the lever must be in its
rear position, activation by pressing the button for 0.5
second.
www.fragoutmag.com
