Frag Out! Magazine
Issue link: https://fragout.uberflip.com/i/958224
(1200 lumens) for about 1.5 minute. After that time, in order to avoid overheating, the power is reduced to 600 lumens. After the head cools down, it is possible to switch it on again in the 1200 lmens mode for another 1.5 minute. Runtimes are in the table. The maximum range of the light beam, according to the manufacturer, is over 230 meters. The control switches are located on O light Valkyrie PL-2 is a reliable pistol weaponlight although some more will- ful users can also attach it to a rifle. It provides huge light output and a pretty wide and bright beam. The light source is a 1200 lumens Cree XHP35 HI LED which together with a reflector is located in the head closed with a sealed lens and a steel cap on top. The head and the body of the PL-2 are made of 6061-T6 aluminum alloy. The back of the body includes two symmetrical buttons on both sides. They work the same as in previous Valkyries WMLs, but they have been made of hard poly- mer. Short pressing of any of the buttons will switch the flashlight on. Holding any of the buttons ac- tivate the momentary switch, while pressing both buttons will activate strobe mode. The electronic circuit used for controlling the light allows working in maximum power mode Story by: Chris „Capitan America" Photos: Michał Sitarski Valkyrie pl-2 Olight Cheap and good accessories