Frag Out! Magazine

slot which goes on whole length of the frame. There is a slot made in the center in which you pin on the latch which is profiled in the speci- fied part of the slot. The latch hold the lens on place. Construction is simple, yet it holds the lens perfectly. The lens itself is made of 8-layer distortion-free Selenite polycarbonate and profiled for maxi- mum coverage of user's eyes and face. It goes quite deep on the sides, almost to the temples, and is bended downwards, to cheekbones. Due such shape eyes are secured from anything that could injure them by getting under the lens from the bottom or from the sides. From the top, the frame is responsible for the secu- rity. It is formed in the small vizor aimed at the forehead. The lens measures 2,5mm in it's thickest point has and is coated with Foil anti-fog coating and T-Shell scratch resistant coating. It meets MIL- PRF-32432, ANSI Z87.1-2010, U.S. OSHA 1910.133 high velocity and high mass impact standards as well as European EN166FT. Of course it pro- vides 100% protection against UVA/UVB/UVC. In the central point of the lens is the nose piece with two rubberized pads. They can be adjust- ed to the user's nose shape which guarantee stability on face during moving. Above the pads there is a slit for the prescription lenses in- sert which is sold separately. The nose piece is friction fitted in the lens and held with some junctions formed on the lens' edge. Thus, it can be removed and placed in the other lens with different color (only single lens from the set is equipped with the nose piece). The glasses, depending from the kit, are pro- vided with soft case closed with Velcro or zip- pered hard case with the foam insert for addi- tional lenses inside. Despite the glasses and interchangeable lenses (gray, clear and copper are available) kit includes safety band soft, cleaning cloth and anti-fog cloth. EYEWEAR

• Cover