Frag Out! Magazine
Issue link: https://fragout.uberflip.com/i/929822
DESIGN Korpus latarki H1R Nova wykonany został ze stopu The body of the H1R Nova flashlight is made from the aircraft grade Type III hard anodized 6061-T6 alumi- num alloy It's 61.5mm long and has 19.5mm (21mm in its head part) diameter. Total weight is only 51.5g, what makes the H1R smaller and lighter than micro-sized Baton S10R. In the upper part of the body there is the head with Cree XM-L2 LED together with the electron- ics and a reflector and a PMMA TIR lens – a lighting system, as befits the angle-head flashlight is oriented perpendicularly to the body. It is convex lens covered with the processes, which give it a honeycomb struc- ture intended for dispersing a luminous beam. In the head top one can find a rubber coated mode switch for changing the operating modes and switch- ing the flashlight (embedded minimally below the head surface, what prevents its activation by accident), and on its rear surface there are ribs for improved cooling when you use the highest mode. The undercut below head is used for attachment of steel, spring-loaded clip. It can be rotated or removed, if you want to use this flashlight as a headlamp (more about that later), and without worrying about scratching the flashlight body – anodization is really hard and it is really diffi- cult to damage its black surface. This black color is broken by cool, metallic blue rims around the lens and the button. In the bottom part of the body there is battery com- partment with cap, in which are two electric contacts for charging. Together with them in the closure is in- corporated a strong magnet, which fulfills two func- tions – it embeds the flashlight in the charger what enables to attach it to the metal elements and using it as a "stationary" light source. In order to ensure a fair grip while twisting it off, the closure is knurled in its bottom part. The H1R is powered by the RCR123A 650 mAh rechargeable battery, which can be replaced with standard CR123A. In order not to confuse a polarity, there is an icon indicating a correct orientation inside the battery compartment. The latter is sealed with a rubber O-ring. The Olight H1R comes with carrying bag, user manual, a headband and a USB charger. The headband is an elastic loop with an adjustable size and silicone light mount. In order to place flashlight in it, it is enough to remove the clip and push the H1R in the brackets, inserting them into the respective undercuts of the body. accessories